YotaTech Forums - View Single Post

excelagator · 01-05-2007, 08:12 PM

I looked into doing a a front D44 for my 89 4runner. The width is different than toy axles, the bolt pattern is the same through you happen to get a chevy D44. If you were going to do this pick up a front to or get a matching pair of axles. The other thing is with the front is making a parts and flipping the steering. Then you can swap out the stock brake master cylinder for a GM MC for the larger volume front brakes.

That is why I picked up a 84 toy straight axle today from the boneyard.

Dan

01-05-2007, 08:12 PM	#7 (permalink)
excelagator Registered User Join Date: Jan 2006 Location: On the Edge Of Lake Superior Posts: 20	I looked into doing a a front D44 for my 89 4runner. The width is different than toy axles, the bolt pattern is the same through you happen to get a chevy D44. If you were going to do this pick up a front to or get a matching pair of axles. The other thing is with the front is making a parts and flipping the steering. Then you can swap out the stock brake master cylinder for a GM MC for the larger volume front brakes. That is why I picked up a 84 toy straight axle today from the boneyard. Dan __________________ Under construction 92 Toy 4x4 89 Toy 4runner...got axle, hopefully sas in later 07, rear locker, 33s 01 Xterra...PML, 31s, TJM bumper, custom sliders, and lots of other stuff