01-25-2003, 10:59 PM
|
#2 (permalink)
|
|
Sponsoring Member
Join Date: Dec 2002
Location: Seattleish, WA
Posts: 9,078
|
My '96 has always run about 1/8" ("measured" at the tip of the needle) below the 1/2 way point. The OBD interface reads this as 190 degrees.
__________________
~ Mark
'96 4Runner Limited S/C MI - 370cc injectors, Air! horns, Airaid MIT, ATS A-arms, 285/75/R16 BFG MTs, Bored TB, Brembo slotted, Cobra 75 WXST, Deckplate, Downey headers, Hayden cooler, IPT valve body, Level 10 torque convertor, Meanstreak exhaust, OME/OME rears, On-board PC (XM, Nav, WiFi, etc), Port 'n Polish, Remote Start, SAW fronts, Hilux console, SMT-5, Stubb's sliders, Supra MAF, TJM-17, 2.0" pulley, Viair 450c, Walbro 190, Weasy2k cams
|
|
|