Quote:
|
Originally Posted by runnerboy97
wow, this is a good thread. i just got in from working on my 3.0, i am replacing the heads cause one was cracked. i got one of the new heads on using the old bolts, but i didnt put them back in the same holes they were previously in. i think after raeading this i am going to go get new head bolts. my question is, will i be able to reuse the new head gasket i just put on, but have already compressed? or do i need to get another gasket for that side.
|
get the loosening sequence, and replace one at a time, this way shouldn't hurt anything
__________________
- Joe
1984 SR5 4runner, 22re, 5-speed, chevy 63"s, rears up front custom pack, BBCS shocks, 2" BL, 5.29's, welded rear, Detroit in front, Longfields, IFS Rear, 39.5x13.50x15 IROK's, Marlin's High Steer, MC07 with stock cases, Marlin's cross member, tube bumper, Warn XD9000, Allied Beadlocks
1999 Taco 2.7 5-speed, LCE Header, Jardine 2.25 Cat-Back, 3" Downey Coilover, 33x13.5 Toyo MT's, ARB Bull Bar, Retrofitted Acura TL HID Projectors with 50W ballasts and 50W DL50 Philips 3900k bulbs
|