YotaTech Forums - View Single Post

00Runner · 07-07-2004, 02:45 PM

I bought the 6 ton stands from HF because of the extension height. I've had no problems with them. If they are rated for X tons then they will hold X tons. I try to keep my purchases at HF limited to simple tools. When you start getting into lots of working parts, hydrolics or electrical components your getting into things where cutting corners will significantly affect quality. But the clamps, jack stands, gloves, goggles, and zip ties I've purchased from them have all worked just fine.

07-07-2004, 02:45 PM	#15 (permalink)
00Runner Contributing Member Join Date: Jun 2003 Location: Menlo Park, CA Posts: 722	I bought the 6 ton stands from HF because of the extension height. I've had no problems with them. If they are rated for X tons then they will hold X tons. I try to keep my purchases at HF limited to simple tools. When you start getting into lots of working parts, hydrolics or electrical components your getting into things where cutting corners will significantly affect quality. But the clamps, jack stands, gloves, goggles, and zip ties I've purchased from them have all worked just fine. __________________ - Brad 2000 4Runner SR5 4x4 5spd 3" Revtek spacer, ARB RD-90 front \| 3.5" Downey coils, E-locker rear \| 285/75 16 BFG M/T \| TJM T-17 \| RB Sliderz \| 1.5" RB BL \| BudBuilt skid \| 4.30s \| SS Rear Bumper onetruth