YotaTech Forums - View Single Post - Turbo for an 86 Pickup?
View Single Post
Old 06-13-2004, 09:48 AM   #8 (permalink)
Flamedx4
Registered User
 
Flamedx4's Avatar
 
Join Date: May 2004
Location: 100 miles offshore as much as possible, & Springfield Oregon USA
Posts: 3,285
No universal blower, of course, each has to be made specifically to fit the engine. There is/was a blower for the 22R, (actually from a couple of different companies) but I've never saw one for the RE. You could change the head and do the blower on the RE, but you would have to go to carburetion rather than FI. (If it wasn't for this I would have done it on my 85, but I will never own another carb engine.) Camden, B&M make blower kits for the 22R, or did at least.

THe RE-T engine had a lot of differences besides just the turbo. The turbo compressor itself is easy enough, but the systems that keep it from destroying the engine quickly is well beyond the tinkerer's capabilities. Wastegate control, detonation control, changing fuel/air requirements etc.

LC Engineering has turbo kits for the 22R. http://www.lcengineering.com/TurboKits.htm

Oh check this out! On their What's New page, LC Engineering now offers a blower kit for the RE! http://www.lcengineering.com/Whatsnew.htm
__________________
All my Yotas are gone. Stuff to sell: http://www.yotatech.com/showthread.p...39#post1009839 -Phil

Last edited by Flamedx4; 06-13-2004 at 09:50 AM.
Flamedx4 is offline   Reply With Quote