YotaTech Forums - View Single Post - Finally got bushwackers any install tips?

Jonathan · 05-21-2004, 07:00 AM

You will have to drill into the rear doors. It should only take two holes for each door to attach the inner template. All the other flares should attach with just screws and rivets and no more drilling. As for the flush holes, they don't hav to be enormous, just big enough that you can shoot a good stream of water up in there. I haven't even drilled any for mine yet, but probably will soon just to stay on the safe side. Good luck and let us know if you have any more questions.

05-21-2004, 07:00 AM	#5 (permalink)
Jonathan Contributing Member Join Date: Dec 2002 Location: Greenville, South Carolina Posts: 1,743	You will have to drill into the rear doors. It should only take two holes for each door to attach the inner template. All the other flares should attach with just screws and rivets and no more drilling. As for the flush holes, they don't hav to be enormous, just big enough that you can shoot a good stream of water up in there. I haven't even drilled any for mine yet, but probably will soon just to stay on the safe side. Good luck and let us know if you have any more questions. __________________ 1996 Black 4Runner V6 5 speed 4X4\| Retrofitted E-Locker\| SAW's\| LC coils and Doetschtech shocks\| ATS arms \| 285 Goodyear MTR's\|TJM T-15 With Warn M8000\|Retrofitted Toyota Hood Scoop\| Stubbs Sliders\|Bushwacker Extend-A-Fender Flares\| Extended rear diff breather\| Uniden 510XL CB w/ 4 Ft. Firestik II Antenna\|Dynomax Super Turbo Muffler\|Black headlights and corners\| More to come... 2007 VW GTI 6 Speed